
Amiga 2500/30
Essentially a standard Amiga 2000 equipped with an A2630 accelerator and an A2090A HDD controller with hard drive from factory. Extremely rare.
Serial: 077190
- CPU: 68000 @7 MHz [68030 @25MHz on A2630]
- Kickstart: v1.3
- Chipset: OCS
- RAM: 1MB CHIP | 4MB FAST (on A2630)
- FDD: Chinon FB-354 | 3,5″ | 880KB | DS/DD
- HDD: MFM Seagate ST138R
- Board revision: 6.x
- A2630 accelerator board
- A2090A HDD controller
- Partitions:
- DH0: Boot
- FH0: Workbench
- FH1: Work
- work done:
- leaky battery corrosion treatment
- new Kickstart socket
- treated area sealed with clear varnish
- FDD disassembled and cleaned
- PSU and mainboard recapped with Rubycon 105°
- blown RIFA cap in strange power socket construction replaced
- defective Rodime HDD replaced, original HDD is in storage
- broken screws drilled out
(one from FDD carrier and two from slot covers) - hard drive configuration with all partitions and data restored to factory settings (WB 1.3)